Big Forging press 3000ton SUMITOMO FPA-3000 Bed 1300x1500mm Height 1200mm 1985 for sale
 






 

• Specification
• Item: Forging press
•  
• (1)Type
• Maker: SUMITOMO HEAVY INDUSTRIES (made in Japan)
• Model: FPA-3000
• Year: 1985
•  
• (2) Capacity & main specification
• 1) Capacity: 3000tf
• 2) Ability Limit Point: 5mm
• 3) Allowable eccentric load: 3000tf
• 4) Allowable eccentric distance: L&R 350mm
• 5) Slide stroke: 350mm
• 6) Slide stroke speed: 20~50spm
• 7) Stroke number: 20tpm(Max)
• 8) Shut height: 1200mm
• 9) Slide adjust distance: 10mm
• 10) Bed hard plate dimensions: RL 1300mm x FB 1500mm
• 11) Slide dimensions: RL 1200mm x FB 1400mm
• 12) Slide knockout capacity: Total 20tf (pin number: 4ea)
• 13) SKO stroke: 50mm ( adjust up) 40mm ( adjust down)
• 14) Bottom knockout capacity: 50tf (pin number 4ea)
• 15) BKO stroke: 20~30mm
• 16) Upright internal dimensions: RL 1400mm
• 17) Main motor: DC 200kw x 1450rpm 440V
• 18) Floor height: 6800mm
• 19) Working height: 1030mm
• 20) Side opening: FB 1000mm x TB 1400mm
• 21) Flywheel energy: 200tf-m (50spm)
• 22) Effective workload: 50spm-20tpm
• 23) Lubrication method: Oil type and grease 
• Oil refueling pump: 1.5kw x 4P 220V 1 set, 0.75kw x 4P 220V 1set
• Electrostatic oil purifier: 0.075kw x 4P 220V 1 set
• Grease pump: 0.2kw x 4P 220V 1set
• 24) Hydraulic unit: 7.5kw x 4P 220V 1 set, 3.7kw x 4P 220V 1 set
• Electrostatic oil purification: 0.075kw x 4P 220V 1 set
• 25) lubrication nozzle type: Spray amount timer adjustment 
• 26) Mold changer: Front and rear trolley placement type die holder replacement device
• Two dolly is placed F & B press
• F&B stroke: Front side 1.57m, Back side 2.87m
• Cycle time: 9minutes 55 seconds (excluding cleaning time)
•  
• (3)Computer system TFPA-3000
• 1) Machine control
• 2) Machine error checking 
• 3) Total utilization rate
•  
• (4)Auxiliaries
• Slide adjust device (hydraulic motor drive)
• Slide knockout device
• Bottom knockout device
• Balance cylinder
• Upper die holder cramp bar
• Lower die cramp bar
• Die holder lift
• F&R dolly type die holder exchange device
• Shaft thermometer (11ea with display)
• Differential transformer type load meter (with overload detection device)
• High voltage receiving panel
• Low voltage receiving motor panel
• DC control panel
• Main motor starter panel 
• Control panel
• Main operation panel (Meter panel 1set, relay control panel 1 set, sequencer panel 1 set)
• Emergency stop switch (attached to the left rear upright)
• Two hand push switch
• Foot step switch
• Rotary encoder (control circuit)
• Rotary encoder (slide adjustment)
• Rotary encoder ( BKO adjustment)
• Electro-magnetic stroke counter
• Transformer
• Outlet: 110V
• Safety plug and block
• Air outlet 3/4B
• Circulating oil supplying device
• Electric centralized greasing supplying device 
• Hydraulic unit
• Mold lubrication nozzle
• Ladder and handrail for the main body
• Safety guarantee cover air
• Air tank
• Pipe and cable in the machine
• Tools of assemble and disassemble

Other details are subject to client's request.



Highly appreciated to your attention.

If you have any interst or inquiry, please do not hesitate to contact us anytime.

Best Regards,


Sinsin Trading Co.,Ltd
#207, Gwangjang-ro 34(Gwaebeop-dong), Sasang-gu,
Busan-city, Republic of Korea(South)
Office : +82-51-322-9007
Fax : +82-51-322-9008
Mobile phone : +82-10-5517-7700
E-mail : sst3335@gmail.com
www.sinsintrading.com